Service for Neutrix
Spare parts overview
| Pos. | Item no. | Description |
|---|---|---|
| 1 | 88896022 | Neutrix Tungsten Grinder 230V-50Hz |
| 2 | 44510050 | Electrode holder NX |
| 2 | 44510164 | Electrode Clamp NX/UT, Ø2.4 mm |
| 3 | 44510440 | Allen key 2 mm |
| 3 | 44510430 | Allen key 4 mm |
| 4 | 44510400 | Key 13 & 17 mm |
| 4 | 44510410 | Key 14 & 17 mm |
| 5 | 44510162 | Electrode Clamp NX/UT, Ø1.6 mm |
| 5 | 44510165 | Electrode Clamp NX/UT, Ø3.2 mm |
| 6 | 44510328 | Wool brush |
| 7 | 99140003 | Plastic bag 120x180 mm |
| 8 | 44510450 | Grease FDA-G2 |
| 9 | 44510291 | Suction cup |
| 10 | 44510390 | Case with foam NX |
| 11 | 44510011 | Switch NX – 850W |
| 12 | 44510150 | Allen screw for clamping of head NX |
| 13 | 44510020 | Grinding console NX |
| 14 | 44510200 | Eccentric plate NX |
| 15 | 44510220 | Tightening screw NX |
| 16 | 44510140 | Guide for electrode holder NX |
| 17 | 44510025 | Speed regulator Neutrix 850W |
| 18 | 44510008 | Motor Wag 40-850W 230V-50Hz |
| 19 | 44510253 | Allen screw M5x12 |
| 20 | Specific for your machine | The machine number |
| 21 | 44510260 | Filter box NX |
| 22 | 44510252 | Filter grille NX |
| 23 | 44510250 | Filter house NX |
| 24 | 44510360 | Grinding dial |
| 25 | 44510290 | Inspection cover NX |
| 26 | 44510190 | Allen screw for stick-out CH M5x30 |
| 27 | 44510370 | Counter nut M8 NX |
| 28 | 44510030 | Diamond disc Ø40 mm NX |
| 29 | 44510100 | Grinding chamber NX |
| 30 | 44510011 | Switch NX – 850W |
| 31 | 44510019 | Coal (2 pcs.) for Neutrix (850W) 2014 |
| 32 | 44510025 | Speed regulator Neutrix 850W |
| 33 | 44510050 | Electrode holder NX |
| 34 | 44510008 | Motor Wag 40-850W 230V-50Hz |
| 35 | 44510100 | Grinding chamber NX |
| 36 | 44510481 | O-Ring Ø48×1 mm |
| 37 | 44510290 | Inspection cover NX |
| 38 | 44510200 | Eccentric plate NX |
| 39 | 44510220 | Tightening screw NX |
| 40 | 44510140 | Guide for electrode holder NX |
| 41 | 44510260 | Filter box NX |
| 42 | 44510252 | Filter grille NX |
| 43 | 44510250 | Filter house NX |
| 44 | 44510253 | Allen screw M5x12 |
| 45 | 44510030 | Diamond disc Ø40 mm NX |
| 46 | 75505110 | Grinding disc kit Neutrix |
| 47 | 44510280 | Wall mount NX |
| 48 | 44510275 | Table mount w/toolholder NX |
| 49 | 44510270 | Table mount NX |
| 50 | 44510285 | Wall mount NX w/toolholder |
Scheduled maintenance
Daily inspection
Move and loosen the angle setting to ensure free movement and clean the guide holder with the included brush.
Filter change
Change the filter on the grinder when it is full, when you change grinding position or when you change the grinding disc.
Change grinding position
When you want to change the grinding position, please follow the steps in the manual or follow the steps shown this video.
Videos
Please take a look at the service videos for the Neutrix. Let us know if you wish to see other service videos.
Contact us
Do you have any questions about our products or another subject? Then feel free to reach out to us using the contact form, email or call us directly. We look forward to hearing from you.
